Strumentazione e Sistemi per Metrologia - Power Supply - T&M - Processo tel. (+39) 031526566
SPECIFICHE CALIBRATORI PORTATILI CALOG
CALOG Calibrators - LOOP II Calibrator
* Measure, source or simulate 0 to 24 mA
* Measure 0 to 32 Vdc
* Continuity test function
* Increment, step, auto step or ramp with built-in 24V power supply for mA loops
* Displays values in mA and % or % and mA
* Logged data is downloaded via the onboard USB port
* Trend logging with programmable timebase of all measured values
* Carry case, protective rubber boot, Li-ion battery, charger, test leads and SD card supplied as standard
* 2 year guarantee against faulty material or workmanship (batteries not included)
Technical Specifications of the CALOG Calibrators - LOOP II Calibrator
Analogue Input Ranges Impedance Accuracy Resolution
0 to 24 mA Input Impedance ± 17 ohm, 250mA Fused 0.01%FS ±1 digit 1µA
0 to 32 V Input Impedance ± 110 kohm 0.005%FS ±1 digit 1mV
Continuity with a <100 ohm trigger @ 1 mA. Gives visual and audible confirmation.
Analogue Output Ranges Maximum Load Accuracy Resolution
0 to 24 mA Output load max 500 ohm 0.01%FS ± 1 digit 1µA
CALOG Calibrators - TEMP Calibrator
* Measure, source or simulate 0 to 24 mA
* Measure and source -10 to 100 mV
* Measure and source 0 to 400.00 ? and 0 to 2200.0 ?
* Measure and source types K, J, T, B, R, S, E, N, U and L thermocouples with configurable internal, external or manual
cold-junction compensation in either °C, °F, Kelvin or Rankine
* Measure and source Pt50, Pt100, Pt200, Pt500, Pt1000, Ni100 and Ni120 type RTD sensors
* Continuity test function
* Increment, step, ramp or valve stroking with built-in 24V power supply for mA loops
* Datalogging facility via SD card which is downloadable using the USB port
* Trend logging feature with programmable timebase
* Carry case, protective rubber boot, Li-ion battery, charger, test leads, CJ Compensation box and
SD card supplied as standard
* 2 year guarantee against faulty material or workmanship (batteries not included)
Technical Specifications of the CALOG Calibrators - TEMP Calibrator
Analogue Input Ranges Impedance Accuracy Resolution
0 to 24 mA Input Impedance ± 17ohm, 250mAFused 0.02%FS ± 1 digit 1µA
-10 to 100 mV Input Impedance > 1mohm 0.01%FS ± 1 digit 1µV
Thermocouple types are Input Impedance > 1mohm 0.01%FS* ± 1 digit(excl CJ) 0.1°C
K, J, T, B, R, S, E, N, U and L
0 to 400.00 ohm 0.05%FS ± 1 digit 0.01ohm
0 to 2200.0 ohm 0.05%FS ± 1 digit 0.1ohm
RTD types are Pt50, Pt100, Pt200, Pt500, Pt1000, Ni100 and Ni120 0.05%FS ± 1 digit 0.01°C
Measurement of Ohms and RTD in 2, 3 or 4-wire configuration
Continuity with 100 ohm trigger and 1mA excitation. Gives visual and audible confirmation.
Analogue Output Ranges Maximum Load Accuracy Resolution
0 to 24 mA Output load max 500 ohm 0.02%FS ± 1 digit 1µA
-10 to 100 mV Output load min 100 ohm 0.01%FS ± 1 digit 1µV
Thermocouple types are 0.01%FS* ± 1 digit(excl CJ)0.1°C
K, J, T, B, R, S, E, N, U and L
0 to 400.00 ohm 10 - 400 ohm 0.05%FS ± 1 digit 0.01ohm
0 to 2200.0 ohm 10 - 2k2 ohm 0.05%FS ± 1 digit 0.1ohm
RTD types are Pt50, Pt100, Pt200, Pt500, Pt1000, Ni100 and Ni120 0.05%FS ± 1 digit 0.01°C
CALOG Calibrators - Process Calibrator
* Measure, source or simulate 0 to 24 mA
* Measure 0 to 32 Vdc and Source 0 to 12 Vdc
* Measure and source -10 to 100 mV
* Continuity test function
* Measure and source frequency from 0 to 20kHz
* Measure and source counts up to 8 digits (99 999 999)
* Increment, step, auto step or ramp with built-in 24V power supply for mA loops
* Displays values in mA and % or % and mA
* Simultaneously measure and source all mA, mV and V combinations (not isolated)
* This unit covers most requirements of PLC and SCADA applications.
* Carry case, protective rubber boot, rechargeable battery, charger and test leads supplied as standard
* 2 year guarantee against faulty material or workmanship (batteries not included)
Technical Specifications of the CALOG Calibrators - Process Calibrator
Analogue Input Ranges Impedance Accuracy Resolution
0 to 24 mA Input Impedance ± 17 ohm, 250mA Fused 0.01% FS ± 1 digit 1µA
0 to 32 V Input Impedance ±110 kohm 0.005% FS ± 1 digit 1mV
-10 to 100 mV Input Impedance >1 Mohm 0.005% FS ± 1 digit1µV
0.00 to 100.00 Hz, trigger level up to 12.0 V Input Impedance 110 kohm 0.01% FS ± 1 digit 0.01Hz
Pulses / min max = 6000.00 and Pulses / hour max = 360 000.00
0 to 20 000 Hz, trigger level up to 12.0 V Input Impedance 110 kohm 0.01% FS ± 1 digit 1Hz
Pulses / Min max = 1 200 000 and Pulses / Hour max = 72 000 000
0 to 99 999 999 counts, trigger level up to 12.0 V in 0.1 V steps
Continuity with a <100 ohm trigger using 1 V @ 1 mA. Gives visual and audible confirmation.
Analogue Output Ranges Maximum Load Accuracy Resolution
0 to 24 mA Output load max 500 ohm 0.01% FS ± 1 digit 1µA
0 to 12 V Output load min 500 ohm 0.01% FS ± 1 digit 1mV
-10 to 100 mV Output load min 100 ohm 0.01% FS ± 1 digit 1µV
0.50 to 100.00 Hz, trigger level up to 12.0 V 0.01% FS ± 1 digit 0.01Hz
1 to 20 000 Hz, trigger level up to 12.0 V 0.01% FS ± 1 digit 1Hz
CALOG Calibrators - LOOP II Calibrator
* Measure, source or simulate 0 to 24 mA
* Measure 0 to 32 Vdc
* Continuity test function
* Increment, step, auto step or ramp with built-in 24V power supply for mA loops
* Displays values in mA and % or % and mA
* Logged data is downloaded via the onboard USB port
* Trend logging with programmable timebase of all measured values
* Carry case, protective rubber boot, Li-ion battery, charger, test leads and SD card supplied as standard
* 2 year guarantee against faulty material or workmanship (batteries not included)
Technical Specifications of the CALOG Calibrators - LOOP II Calibrator
Analogue Input Ranges Impedance Accuracy Resolution
0 to 24 mA Input Impedance ± 17 ohm, 250mA Fused 0.01%FS ±1 digit 1µA
0 to 32 V Input Impedance ± 110 kohm 0.005%FS ±1 digit 1mV
Continuity with a <100 ohm trigger @ 1 mA. Gives visual and audible confirmation.
Analogue Output Ranges Maximum Load Accuracy Resolution
0 to 24 mA Output load max 500 ohm 0.01%FS ± 1 digit 1µA
CALOG Calibrators - TEMP Calibrator
* Measure, source or simulate 0 to 24 mA
* Measure and source -10 to 100 mV
* Measure and source 0 to 400.00 ? and 0 to 2200.0 ?
* Measure and source types K, J, T, B, R, S, E, N, U and L thermocouples with configurable internal, external or manual
cold-junction compensation in either °C, °F, Kelvin or Rankine
* Measure and source Pt50, Pt100, Pt200, Pt500, Pt1000, Ni100 and Ni120 type RTD sensors
* Continuity test function
* Increment, step, ramp or valve stroking with built-in 24V power supply for mA loops
* Datalogging facility via SD card which is downloadable using the USB port
* Trend logging feature with programmable timebase
* Carry case, protective rubber boot, Li-ion battery, charger, test leads, CJ Compensation box and
SD card supplied as standard
* 2 year guarantee against faulty material or workmanship (batteries not included)
Technical Specifications of the CALOG Calibrators - TEMP Calibrator
Analogue Input Ranges Impedance Accuracy Resolution
0 to 24 mA Input Impedance ± 17ohm, 250mAFused 0.02%FS ± 1 digit 1µA
-10 to 100 mV Input Impedance > 1mohm 0.01%FS ± 1 digit 1µV
Thermocouple types are Input Impedance > 1mohm 0.01%FS* ± 1 digit(excl CJ) 0.1°C
K, J, T, B, R, S, E, N, U and L
0 to 400.00 ohm 0.05%FS ± 1 digit 0.01ohm
0 to 2200.0 ohm 0.05%FS ± 1 digit 0.1ohm
RTD types are Pt50, Pt100, Pt200, Pt500, Pt1000, Ni100 and Ni120 0.05%FS ± 1 digit 0.01°C
Measurement of Ohms and RTD in 2, 3 or 4-wire configuration
Continuity with 100 ohm trigger and 1mA excitation. Gives visual and audible confirmation.
Analogue Output Ranges Maximum Load Accuracy Resolution
0 to 24 mA Output load max 500 ohm 0.02%FS ± 1 digit 1µA
-10 to 100 mV Output load min 100 ohm 0.01%FS ± 1 digit 1µV
Thermocouple types are 0.01%FS* ± 1 digit(excl CJ)0.1°C
K, J, T, B, R, S, E, N, U and L
0 to 400.00 ohm 10 - 400 ohm 0.05%FS ± 1 digit 0.01ohm
0 to 2200.0 ohm 10 - 2k2 ohm 0.05%FS ± 1 digit 0.1ohm
RTD types are Pt50, Pt100, Pt200, Pt500, Pt1000, Ni100 and Ni120 0.05%FS ± 1 digit 0.01°C
CALOG Calibrators - Process Calibrator
* Measure, source or simulate 0 to 24 mA
* Measure 0 to 32 Vdc and Source 0 to 12 Vdc
* Measure and source -10 to 100 mV
* Continuity test function
* Measure and source frequency from 0 to 20kHz
* Measure and source counts up to 8 digits (99 999 999)
* Increment, step, auto step or ramp with built-in 24V power supply for mA loops
* Displays values in mA and % or % and mA
* Simultaneously measure and source all mA, mV and V combinations (not isolated)
* This unit covers most requirements of PLC and SCADA applications.
* Carry case, protective rubber boot, rechargeable battery, charger and test leads supplied as standard
* 2 year guarantee against faulty material or workmanship (batteries not included)
Technical Specifications of the CALOG Calibrators - Process Calibrator
Analogue Input Ranges Impedance Accuracy Resolution
0 to 24 mA Input Impedance ± 17 ohm, 250mA Fused 0.01% FS ± 1 digit 1µA
0 to 32 V Input Impedance ±110 kohm 0.005% FS ± 1 digit 1mV
-10 to 100 mV Input Impedance >1 Mohm 0.005% FS ± 1 digit1µV
0.00 to 100.00 Hz, trigger level up to 12.0 V Input Impedance 110 kohm 0.01% FS ± 1 digit 0.01Hz
Pulses / min max = 6000.00 and Pulses / hour max = 360 000.00
0 to 20 000 Hz, trigger level up to 12.0 V Input Impedance 110 kohm 0.01% FS ± 1 digit 1Hz
Pulses / Min max = 1 200 000 and Pulses / Hour max = 72 000 000
0 to 99 999 999 counts, trigger level up to 12.0 V in 0.1 V steps
Continuity with a <100 ohm trigger using 1 V @ 1 mA. Gives visual and audible confirmation.
Analogue Output Ranges Maximum Load Accuracy Resolution
0 to 24 mA Output load max 500 ohm 0.01% FS ± 1 digit 1µA
0 to 12 V Output load min 500 ohm 0.01% FS ± 1 digit 1mV
-10 to 100 mV Output load min 100 ohm 0.01% FS ± 1 digit 1µV
0.50 to 100.00 Hz, trigger level up to 12.0 V 0.01% FS ± 1 digit 0.01Hz
1 to 20 000 Hz, trigger level up to 12.0 V 0.01% FS ± 1 digit 1Hz
- Home |
- Metrologia |
- Power Division |
- Sicurezza Elettrica & EMC |
- Test & Measurement |
- RF |
- Processo |
- Note Applicative |
- Contattaci |
- Dove Siamo |
- English